I dont understand what this broadcast mode brings to the table? I bought the original SC5000s and X1800 mixer 2 years ago when they first came to market, and have been streaming with it using OBS since day one. Running windows 10, I installed the x1800 mixer drivers, then in OBS selected output USB 9/10, made sure the sampling rate was set to 44.1 and it works fine. What does this broadcast mode do different than just selecting output 9/10? There was never a separate audio interface needed. It has always been built in to the mixer already.
The mixer has an interface with 10 in/8 out interface.
I have the same setup… I can’t get sound at all into OBS!!! WTHECK!!!
Hi, Are you running Windows 10? If so, maybe check your Windows 10 privacy settings. They will override any audio interface mappings you may have. If you click Start > Settings > Privacy > Microphone, make sure Microphone access for this device is set to on. Make sure you have the Denon x1800/1850 drivers installed as well, which can be downloaded on the website, and then in OBS make sure you select Line 9/10 as your input source. That source is the main output of the mixer via USB.
1 Like
Jenna… you rock 100% I of course have “god mode” on Windows 10 and turned off all invasive/tracking app and settings… I definitely have sound now!!! Thank you hahhahahaha www.soundcloud.com/mnraverkid shoot me your links to your music!!!
1 Like
Audacity had the same privacy thing under Windows10 build 1803 two years ago.
However, many people said OBS still had the issue of only being able to select ch1/2.
1 Like
Just so you guys know you can now hook up your iOS devices and record the audio with the video.
It may not be a big deal but a lot of people would like to live stream from their phones.
1 Like
Nothing, it’s just a setting shortcut for less tech savy users not to screw something under advanced audio settings on the mixer.
1 Like
exact same thoughts… As a matter of fact, in Ableton, I can listen to any channel of the mixer. So I have SC5000 connected digital to the mixer, and in ableton if I pick any channel with ASIO driver I get the output too. So I have 5 "inputs in ableton each channel + master.
I am on a mac-but can and will try pc to see if there is any difference.
I didn’t know OBS could select 9/10 mine always looks only at 1/2. So what I was doing was using an RCA from master out back to channel 1 then doing my mix in channel 3 and 4 and using 1 as a master out. I will download this update as soon as I can and see if broadcast mode fixes this (I am expecting that it will work)
1 Like
On my 1800 I could not find any way to send master out over any USB channel besides 9/10. The 4 fader channels can all be reassigned but I could not find any setting for changing master out
I can add any “windows” Sound device to the OBS mixer. I have an x1850 - this one shows 5 output devices in windows (not the ASIO driver - alto that works in ableton in the same way for me). And so if I add these to the OBS mixer I can record all four decks and master in parallel if I wish.
Can it be a difference between the two hardware?
Hi Everybody, I followed the procedure and everything was working fine. It was also working in Audacity. I did a shutdown of my PC, my mixer and went out for one hour of sport. Restarted again everything and it is not working anymore. IN Audacity I have the error : “-9999 Unanticipated host error” … No way to get it working again. So I have connected another PC and installed the software. …Same problem… So it is not the PC. Reboot of the mixer and verified if broadcast is on. …grmmfff… it is not working. Any idea what this could be ?
Hi mate
Ive tried all of the above with no success.
Latest X1800 fw and driver - check, Broadcast mode selected - check, Microphone on in privacy (Win 10) - check,
Audio input capture added - check, Line 9/10 selected - check, No meter activity on obs - still check,
I am one of those less tech savy folk referred to in here
Any idea what i might be missing. Please!!
Select the lines 1/2 not 9/10 when in Broadcast mode
Thanks Norse. Tried that. Nothing still. I wish it was in my nature to just forget about it
If anyone has any ideas on what I might try next id really appreciate it. I’ve spent hours over 2 days trying to resolve this issue now.
OBS is listing all the mixer channels. Ive tried choosing each of them by this stage. Could there be a sound setting on windows thats ive missed?
Thanks all