I’m hoping you can help. I have 2 x SC5000M & X1800.
I had originally wired the SC5000M decks to the mixer via layer A&B outputs to the line in Inputs on the mixer.
Everything was fine but I was finding that the song playing would just drop out and there was no sound at all not even the mixer was showing a signal even though the track looked like it was playing fine. Also nothing in the headphones.
I then re wired each SC5000M via the digital output direct into the digital input on the X1800.
This seems to work fine now but the left hand deck is on Channel 1 and right hand deck is on channel 2. I would prefer to have them on channels 2 and 3.
Is there a way to switch them without having to go back to how it was wired before.
Also just noticed that on the right deck the layer button is not lit up so can only play 1 track but the left deck all is perfect just need to move the channel.
Many thanks Dave
To have Left Deck Layer A on Ch2 attach the Layer A to input 2, Layer B to input 1
Then do the oposit with second Deck.
Layer A ch 3 and Layer B Ch4.
The Link cables switch like this - Left Deck LINK 2, Right Deck LINK 3.
I did have it wired the way described with layer A&B into the inputs but there was sound loss so moved the inputs to digital out from the SC5000M To digital inputs on mixer but there is only 2 digital inputs and not 4.
I have found a solution though by using layer A on left hand deck which plays on channel 1 and right deck on layer B which will play on channel 4.
I would of just liked them on channels 2 and 3 that’s all.
Thank you for your help.