Bajar el firware

[MIROSKYS]

Hola buenas, necesito bajar el firware de la mcx8000 a una versión anterior a las 2.5 actual, pues al actualizar la controladora se queda siempre encendida. No interactúa el botón de encendido y apagado. Y antes de mandarla al servicio técnico, quiero descartar que sea eso.

Donde puedo descargar una versión de firmware por debajo de la 2.5

Gracias

Hello good, I need to download the firmware of the mcx8000 to a version prior to the current 2.5, because when updating the controller it always stays on. The on / off button does not interact. And before sending it to technical service, I want to rule out that it is that.

Where can I download a firmware version below 2.5

Thank you

[AntiStar]

For old firmware: https://www.denondj.com/downloads-archives#mcx8000/

[MIROSKYS]

Ok, muchas gracias.

[SlayForMoney]

Also, old firmware will not help you, it’s a known hardware weak spot.

[MIROSKYS]

Y como se soluciona ese problema???

[SlayForMoney]

Power Button Not Working

For whatever reason the power button on the back of my Mcx8000 is no longer working. Thankfully it is stuck on the “on” position regardless of its state of press. A bit paranoid it is going to just stop working. Tried all firmware etc and its also been cased since day1 so really not sure what is happening with it. Click and holds etc so its not physically broken. Has anyone had this issue offer a solution?

MCX8000 Two faults with unit

Screen freeze and now power stuck on as power switch doesnt work. I love the mcx8000 tried contacting denon no reply re -repair options. Disappointed two issues now with my unit. Out of warantie and would consider sending for repair.

Power Button not workin

HI, After 2 weeks , the power button stopped working. Pushing the button on/off does not make any difference it always stays on. The only way to shutdown the power is to take the power ac out of the outlet. Has anyone experienced the same ? Any fix ? Thank you

Power button failed!

so as above really bizarre did 3 gigs this weekend fri & sat with no issue, got to my gig sunday plugged in the mcx and the power came straight on, the switch seems to be working fine latching on & off etc, but the mcx stays permanently powered. i’m not to bothered about it, but should get it looked at for piece of mind. but with denon’s incredibly slow service i can’t be without it for more than a couple of weeks. i’ve seen one other post with this issue surely there must be more, have you had …

Power switch

hi guys just a quick one, had my mcx-8000 close to 2 1/2 years, it’s been back to denon twice in 2018, once for a failed power switch and freezing displays, then a second time for freezing displays, anyhow the last year it has worked faultlessly, until last saturday it would seem the power switch has failed again and the unit is stuck on. now i know i’m probably out of luck for a warranty repair, so if i leave the unit as is, will it stay powered on indefinitely? my only worry is it will fail ha…

[MIROSKYS]

Muchas gracias, pensare si la llevo o no,